My Dyson Vacuum Turn On

Why Won’t My Dyson Vacuum Turn On? Dyson vacuums are considered high-end vacuums today. Dyson bagless, cordless, vacuums are in more demand due to their high suctioning power. However, depending on which model of Tyson vacuum you do use, you may find it sometimes won’t turn on.  

What Is The Cause Of The Dyson Vacuum Not Turning On 

The Dyson vacuum uses a thermal safety system inside. When the thermal system begins to overheat, it cuts the power to the machine. Thus, the most common cause of the failure of the power of the Dyson vacuum is overheating and cutting off. When this happens, you have to wait for half an hour to cool the system. When it cools down, turn your Dyson vacuum on.  

Common Causes Of Dyson Vacuums Not Working 

These are the common problems of the vacuum machine that do not turn on.  

•    No Suction Power Because Of Overheating in My Dyson Vacuum

When the vacuum works in full suction power mode, the motor drains more battery power. When it drains more power, the motor begins to get hot. Then it shows an amber LED light, which means the motor needs some time to cool down. Wait for an hour. Then put the vacuum back on the charger. 

• Overfilling Of The Vacuum’s Dust Bin 

One of the most common causes of the failure of the Dyson Vacuum is the overfill of the dust bin. When the dust bin is full of dust, dirt, and other debris, it reduces the suction power of the vacuum and stops it from working. Remove the dust bin and clean it from all the dust, dirt, and debris.  

• Hair Is Wrapped Around A Brush Roller 

The hair is wrapped with a brush roller. That stops the machine from working due to the reduction of suction power. Remove the brush roller and clean it.

•    Due To Dust Blockage In My Dyson Vacuum

Check all the areas for blockage. Check the tube that connects the motor to the brush roller. The dust blocks the tube and the suction power of the vacuum is reduced.  

• Amber LED Flashlight in My Dyson Vacuum 

The amber light shows that the machine is working at a cool temperature. The motor drains more power and then it gets hotter. Let the machine cool down.  

• Blue LED Flashing Light 

When the Dyson vacuum shows a blue light, it means that the battery is getting low on the machine. Then clean the dust bins and charge them. When the vacuum flashes blue light quickly, it indicates that there is no power. Or the dust and debris can block the filter. Remove all the filters and clean them from all debris.  

• LED Red Lighting

The red light indicates that there is an actual fault with the vacuum itself. Take the vacuum to Dyson or call them.  

• Vacuum Filters Become Clogged

It is one of the most common problems with vacuums. The filters get clogged with dust, dirt, and other small particles. These particles block the filter and stop the vacuum from running. This also causes the overheating of the motor. 

What should I do when my Dyson Vacuum Won’t Turn On 

When your Dyson vacuum has stopped, you should do the following. Remove the dust bin from the machine and clean it from debris. Clean all areas from dust that causes the blockage of suction power. Clean the brush roller with the hair.

Check the hoses and clean them to prevent blockages. Remove all the filters of the Dyson vacuum. Wash the filters by hand in cold water. Put the filters under running water until they are free of all dust and debris. The filters have plastic covers, tap the filters with your hand, and then let them dry in the air. Remove the second filter from the ball model vacuum.

Remove the cover from the filter and then remove the filter in an anti-clockwise direction. Also, rinse them under cold water. Then it dries in the air. 

After Cleaning The Filters 

 Reinstall the filters in the vacuum after cleaning them. Put the dust bin down after cleaning the place. Make sure that all the components fit correctly before vacuuming. If you do not insert anything correctly, then the vacuum won’t work properly. 

Replacement Of The Motor 

If your motor has a pungent smell, power is lost. Then it may be a failure of the motor and there will be a need to replace the motor. 

Conclusion 

Mostly, Dyson vacuums won’t turn on because of overheating the motor. The motor gets heated up due to the blockage of filters and the other tubes etc. The best way to start the Dyson vacuum is the cleaning every part of the vacuum.