Find How to Clean Roller Brush on Shark Navigator Vacuum
It’s good to learn how to clean roller brush on shark navigator vacuum. But, at first, you need to remove the roller brush from the vacuum accordingly. Removing the roller brush isn’t hard. But, you need to do it with care and diligence.
Next, we’ll talk, in short about the Shark Navigator Vacuum. Then, we’ll move to the disassembling of the roller brush from the vacuum properly. Overall, you’ll also learn to reassemble the parts. To get the most of the discussion, read the article up to the last portion.
Talking about Shark Navigator Vacuum
Shark Navigator vacuums are very fast and smart vacuum cleaners. But, no matter how good a vacuum cleaner is, they need the cleaning as well. You also need to do the maintenance to have the ultimate output from a vacuum cleaner. Roller brush is a part the also needs proper and regular cleaning.
The shark roller brush is capable of picking up extremely tough and sticky particles. In addition, it can effectively remove dust and hair, which are otherwise challenging to clean manually, through the use of a shark roller brush. However, there will come a time when the brush will accumulate a considerable amount of hair around it.
If the hairs on the brush are too much, you’ll see that the shark navigator vacuum won’t run well. At that point, it’s hard to clean the brush over again. So, it’s better to clean the roller brush regularly and avoid having unexpected problems of a shark rocket vacuum.
Detach the Shark Navigator Vacuum from Power Source
The first thing to do is to remove the vacuum from any kind of power source. Cleaning or disassembling with an active power source can hamper safety. it can also cause massive accidents. So, ensure that there’s no power source in and out of the shark navigator vacuum.
Many statistics say that, electrical accidents are one of the main causes of deaths in different parts of the world. So, at first, the safety is the main issue. It should not be compromised in the list bit. So, always have this reminder before you’re going to handle any equipment that are electrical.
Now, you remove the power source and also stay away from the power source. For safety, it’s better that there’s no power source around where you’ll be working with the shark navigator vacuum. Also, gather all the equipment you need and sit an place away from any sorts of power source.
Locate the Shark Roller Brush
Now that you’ve gathered every equipment you need, it’s time to identify the roller brush. It’s basically at the underside part of the vacuum. So, to have a proper view, keep the vacuum on the other side. That way, the roller brush will be better visible.
Now, one by one, you should take out the screws. But, always place the screws together so you don’t loose them. Loosing them will create another problem while assembling the parts again. Rusted screws will require some cleaning so they come off easily. Usually, you should find around four screws. But, if there’s one more or less, there’s nothing to worry about. The number of screws is different in different models.
Pop Out the Roller Brush from Shark Navigator Vacuum
Now, you’ve unscrewed the screws, you’ll see the roller brush from the unit. If your unit or the compartment needs to be opened by unscrewing, do that also. After that, you can pull out the brush roll gently. Remember that, taking out the roller brush without removing the screws can damage the vacuum cleaner as well as the roller brush.
There’s a belt on one end of the roller brush. If you find that the roller brush is attached strongly to the belt, try removing it gently to avoid any damage to any components of the vacuum cleaner. Still, if you find problems, rotate the brush roll slowly. Eventually, the brush roller will come out. If you become hasty, you’ll see that the brush roller starts to deform. That is not the way to do it.
So, being gentle is the key just when you are at the edge of pulling the brush. Remember that, it can damage the belt, roller, and other parts of vacuum as well. There’s specific structure and orientation of everything in an electrical device. Doing anything with force will damage that structure. It can lead to not working of the vacuum cleaner at all. So, better avoid doing that. If you find too much problems, follow the users manual to get the appropriate answer.
Cleaning the Shark Navigator Vacuum Hepa Filters
You’ll find hepa filters on the shark navigator vacuums. However, these vacuums has two hepa filters. So, you can imagine, how effective cleaning these vacuum cleaners do. But, to clean the hepa filters, you can simply use two steps:
- Identify and remove the filters. They’re usually at the bottom of the dirt container of your vacuum cleaner.
- Clean and rinse them properly. Also, remember to dry them as well.
Final Thoughts
Since, we’ve come to the end, we’d like to know about your views on cleaning the roller brush of shark navigator vacuums. You can let us know about your idea on our comments box. Also, if we’ve got anything more to share, let us know that.
At last, we’ll recommend three important things. One is to disassemble all the parts with the utmost care. And, the second one is to dry clean all the parts properly. Wet parts should never be attached to the vacuum. Lastly, don’t work near a power source when you’re handling any electrical device.
