Dyson vacuum is currently one of the popular vacuum cleaners. The ultra-powerful vacuum cleaner arrives with a lot of attachments along with a hose. The hose attachment of the vacuum cleaner allows you to clean things where flexibility is a must. It allows you to reach the hard to reach areas. Check out the article to find how to use the Dyson vacuum with the hose.
If you have a Dyson vacuum, it is important for you to know the correct procedure for utilizing the machine. The Dyson vacuum equips some powerful features, which also makes it a bit tricky to use. If you are specifically wondering about using the vacuum cleaner with the hose, you have arrived at the right place. Keep reading to know how to do this.
How to Use Dyson Vacuum with The Hose?
If you want to use the Dyson Vacuum cleaner in hose mode, check out the below steps. We will discuss the exact steps you will require going through. Keep reading to check them out.
Before You Begin
Be aware of the below things before you start using the hose:
- Make sure that the machine is in the upright position. This will assure that the brushbar will not rotate in this position and prevent damaging the floor.
- Another thing that you need to assure is to keep things like loose cloth or hair from the reach of the wand cap when the machine is switched on.
- Also, make sure that the wan cap is closed when you are not using the tool. The hose might pull back when you turn it on due to powerful suction. Be aware of this issue.
- While cleaning the trick surfaces like the stairs, make sure to position the machine in the correct manner to avoid any falls and damages.
Hose Mode
Now let’s check the steps you need to follow for the hose mode:
- The first thing you need to do is to remove the wand handle from the machine. To do this, extend the wand and then press the side hose release buttons.
- Pressing the side hose release button will remove the wand handle from the hose. Pull out the hose to completely separate it from the wand.
- Now you can position the preferred tool for the specific cleaning work. You can either put the attachment on the end of the hose or the wand.
- If you are going to clean the stairs, make sure to put the machine on the bottom of the stairs for the best result.
When you are done, you might want to put the wand back on the machine. If so, you will require putting the wand button in forward-facing. Now you can put it back.
Wand Mode
You might also want to make use of the wand mode in the machine. In case so, here are the steps for you.
- The first thing you need to do is to push back the wand cap. Simply pull the wand from inside the handle until you hear a click sound.
- The next thing you need to do is pressing the wand release button on the machine. This will release the wand handle from the machine.
- Now if you want to put back the wand inside the hose, make sure that the hose is positioned straight.
- Then you will require pressing the same release button and push the wand into the hose.
The vacuum machine will follow you when you put it in the wand mode or the hose mode. So, make sure you have positioned it appropriately to avoid any issues.
How to Remove Hose from the Dyson Vacuum
If you want, you can also remove the hose from the Dyson vacuum. It is actually pretty easy. Keep reading to find out the exact steps you will require following to remove the Dyson vacuum. The button to remove the hose from the machine is situated in the transparent cyclone you. So, the first thing you need to do is to remove the clear bin. To do this, grab the handle of the bin and then press the release button facing the vacuum, and then removing the bin.
Now reach the hose release button which is near the vacuum body and the clear bin is attached. You will require holding the lower cord winder while pressing the hose release button. This will allow you to completely remove the hose from the vacuum. You will require removing the hose from the vacuum machine for several reasons. One such reason is the clogged hose. When someone is stuck in it, you have to remove the hose and then clean the hose to unclog it.
FAQS
Here are some of the frequently asked questions about the Dyson vacuum cleaner that might help you.
Why is my Dyson not working after I cleaned the filter?
Well, there can be several things that can cause this issue. One of the common reasons is you might not reinstall the filter in the correct manner. Make sure that you are following the exact steps mentioned in the user manual while cleaning the machine. This might also happen if the filter is wet or the motorhead has malfunctioned.
Sometimes, the old filter that is worn out or got some blockage might also cause this issue.
Can I leave my Dyson on all the time?
It is not going to be a good idea to keep your vacuum cleaner on all the time. It might not cause any issues quickly but in the long term it will reduce the lifespan of the machine
Do Dyson filters need to be replaced?
Yes, like any other filter, you will require replacing the filters of the Dyson vacuum. Usually, the filter for the vacuum arrives with a good lifespan. Usually, it lasts around 12 months, as per the manufacturer.
Conclusion
The Dyson vacuum is a heavy-duty vacuum with a lot of features and power. We hope the above guide will help you to use the Dyson vacuum with the hose.
