How to Use Automatic Pool Vacuum

Disclaimer: There are affiliate links in this post. At no cost to you, I get commissions for purchases made through links in this post.

Are You On the Lookout for How to Use an Automatic Pool Vacuum?

If you want to install your pool vacuum, you might have some concerns, such as how much time you would spend maintaining it. Scrubbing your pool, cleaning and vacuuming your pool, balancing your pool’s chemicals usage, and all the other maintenance tasks can be extremely tedious and time-consuming. But they are extremely crucial steps to keep your pool sanitary and clean.

To let your pool be healthy, it’s essential to keep the water moving. This ensures that the dirt microbe and other disgusting things like algae and other organic materials don’t build up inside the pool.

 

Your pool pump does the most important job of circulating water in and out of the pool and passing it through the pool filter.

 

Water in your pool goes through the suction side and returns through the pressure side.

 

What Is An Automatic Pool Cleaner? 

An automatic pool cleaner is a vacuum cleaner designed to clean your pool and get rid of all the dirt, sediments, and debris from your pool automatically. There are two types of automatic vacuum cleaners.

  1. Suction Pool Cleaner

Suction pool cleaners are attached to a skimmer, dedicated vacuum line in the pool wall, or the other suction port. Then the cleaner uses the suction from the pool’s filter to vacuum the pool. This type of cleaner pulsates the water in order to create a motion.

What is more, some cleaners are designed for climbing walls and coming with wheels, and others have rubber disks. This type of pool cleaner can quickly overlook your pool filter and pump, especially when the pool is dirty. It’s important to keep checking whether the basket needs to be emptied.

Suction vacuums cost something between $100 to $400, depending on the model.

How to Use  An Automatic Pool Vacuum

here are the steps to install both types of cleaners;

How to Install The Suction Pool Cleaner

Suction cleaner vacuums are much easier to install than others and can work with almost any pool system.

You should read the manual before trying to install the pool cleaner.

·        Turn Off the Power Supply

Turn off your pool pump main source of power

·        Scrub Your Pool

It’s imperative to start with a clean pool. Scrub your pool’s wall and clean the filter and pump the strainer basket.

·        Turn On Suction

Switch in your suction vacuum and let it run for about 5 minutes or so. This will clear the suction line, and you will get maximum suction out of your cleaner.

·        Assemble 

If your vacuum needs assembling, assemble it.

·        Put Away the Skimmer

Remove the skimmer basket from the pool and complete the skimmer assembly

·        Put The Hose in The Water

Submerge the vacuum’s hose in the pool and let it fill up your entire pool. Let your cleaner sink to the pool to the bottom of the pool, then turn on the pool pump

2.  Pressure Pool Cleaner

Pressure pool cleaners are the most famous type of cleaner, and they attach to a pool return or dedicated line for the cleaner. These cleaners offer two different options,

    1. Booster pump cleaner and
    2. filter pump cleaner

The booster pump cleaner is much more powerful than a filter pump cleaner. Booster pumps are also much faster, i.e., they will help you completely clean your pool in less than 2 hours.

Filter pump cleaners are not powerful and have to be manually attached and removed in order to shut them off.

The pressure pool cleaner has a wheel, a filter bag, a hose, and a return jet hose.

However, these pressure pool cleaners are a little more expensive than the suction pool cleaner and can range anything between $200 to $900.

How To Use A Pressure Pool Vacuum

It’s quite easy to install a pressure-side pool cleaner yourself. The only time you need professional help with your vacuum is if you are trying to install a booster pump.

Installing a pressure pool is pretty much the same as the suction cleaner. The key difference is that you are hooking it up to the opposite end of the circulation.

  • Clean your pool filter as well as the pump filter basket. You don’t have to pick up dirt from the pool, as pressure cleaners are much more efficient in picking up medium and debris.
  • Flush the return line by turning on the pool pump for at least five minutes and then turn it off again.
  • Attach the wall fitting that came with the pool cleaner onto your pool’s return line. Depending on your cleaner’s design.
  • Attach the quick disconnect to the wall fitting.
  • Trim the leaner hose to the same length as the deepest part of your pool and then attach it to the quick disconnect wall fitting.
  • Assemble the automatic cleaner meaning the filter bad and any component that is not attached
  • Turn on your main pool pump and let it prime. And turn on your booster pump (if you have one).

 

 How Long Can I Run My Automatic Pool Vacuum?

Well, the average time for your pool’s cleaning ranges from two to six hours. Moreover, if you have a habit of cleaning regularly, this time may get shortened.

Bottom Line 

Swimming and splashing of water is all fun and important activity for everyone. However, keeping your pool clean might be a tricky task do. For this, a pool pump has proven itself a good helper for pool owners.

Therefore, if you own a pool and are in need of how to use an automatic vacuums guide, follow the steps mentioned in the article.

Leave a Reply

DMCA.com Protection Status
DMCA Protected & Monitored
error: Content is protected DMCA !