Unclogging A Shark Vacuum

How To Unclog A Shark Vacuum? Vacuums enable us to clean our places in variety of ways. They offer in depth cleaning, superficial cleaning and also wet and dry cleaning. Apart from these many times vacuums are also used to clean spillage and the dirt and debris under the carpets.

When these cleaning devices offer so much to us, they themselves require maintenance too. Vacuums can be subjected to accumulation of dirt, debris, pet fur and hair strings. The accumulation of dirt and debris can eventually cause the vacuum to slow down and also contributes to reduced function and efficiency of vacuum.

In general, also, vacuum cleaners should be timely maintained. They should be cleaned and their necessary components should be replaced as well. Vacuum cleaner components such as filters should be replaced biannually while the hoses should be cleaned every two to three months.

If you encounter your vacuum cleaner clogged then here is everything you need to know about clogged vacuum cleaner.

Ways For How To Unclog A Shark Vacuum

In case if you have a clogged vacuum encounter then you do not have to rush to the vacuum cleaner retailer rather you can just follow certain do it yourself steps to clean your clogged vacuum cleaner.

1. Removing And Cleaning The Hose To Unclog A Shark Vacuum

First method to unclog a shark vacuum is by removing and cleaning the hose. Following are the steps to do so.

• Pull Out The Hose Of Vacuum

First method to unclog your vacuum involves cleaning the hose of your vacuum cleaner. Your hose is the connection between your brush roller and the dust bag. Before unlocking the hose make sure that the power supply is switched off to prevent any shock.

Often the hoses are attacked with the screw to the vacuum body, to unlock these hoses you can refer the manual guide of your vacuum cleaner.

• Unclogging Your Hose

Next step is to unclog your hose. For this you can use any long object and push it through your hose. You have to be careful in this step to prevent puncturing your hose. If your hose is transparent hold is in front of light to have a better view.

You can also use a long thin brush to clean the hose till will clean the boundaries as well as super coiling of the hose.

• Using Soda and Vinegar

To neutralise and breakdown the bacteria or mould grown inside the hose you can make the best use of baking soda and vinegar. Sprinkle baking soda inside your hose and shake it enough so that the inner boundary is completely covered. Next pour vinegar, let the mixture bubble. This mixture will breakdown all the bacterial colonies and toxins accumulated in the hose.

• Rinse The Hose

Next step for unclogging your shark vacuum hose, you can rinse your hose with warm water. Make sure you drain out warm water multiple times from the body of hose to prevent any residue from staying in.

If rinsing is a difficult option, then you can let your hose stay in the sink filled with warm water.

• Dry Your Hose

After cleaning your sink completely, allow your hose to dry out. To let your hose dry, hang it vertically somewhere so that all the water drains out. Allow your hose to dry out for an hour or so. Do not reattach wet hose into your vacuum cleaner as this might lead to shock.

2. Pulling Out A Clog In The Lower Hose To Unclog A Shark Vacuum

Second method to unclog your shark vacuum cleaner hose is pulling out the clog which is residing in the lower hose. Following are the steps to do so.

• Take The Main Hose Out Of The Vacuum

First step is to take out the main hose from the vacuum cleaner. The main hose is near the roller brush and the main body. Make sure to pull it out appropriately. If the hose is screwed, you can unscrew it or you can also refer to the user manual.

• Unscrew The Lower Hose From The Vacuum Body

Next step is to unscrew the hose from the vacuum body. The lower hose is the main area where the hose connects with the machine. Locate the screws through which hose is connected, use a screwdriver and loosen the screws.

• Use Of Needle Nose Pliers

After you unscrew the hose, look for the clog in the hose. If you are able to see the clog then grab a pair of needle nose pliers to get hold of the hose. Once the clog is held through pliers, pull it out to unclog your hose.

• Reattach The Hose

The final step involves reattaching the hose to your vacuum cleaner body. To do so, first screw the lower hose in its place by the help of screwdriver. Next, connect the main hose to the body of lower hose to get your vacuum cleaner assembly in proper shape.

Signs Your Vacuum Cleaner Is Clogged

As discussed above, vacuum cleaners also require proper maintenance timely. Hence, failure to do so can lead to consequences such as clogging, reduced suction power and inability to clean the surface of your place.

The question is how would you know if your vacuum cleaner is clogged. So here are the signs which will indicate if your vacuum cleaner is clogged.

• Loss Of Suction

One of the most significant signs of clogged vacuum cleaners is loss of suction of vacuums. Ultimately, when there is handsome amount of clog deposited inside your vacuum hose, the suction pull or suction power of the vacuum will automatically reduce. It will not be able to clean the surface efficiently and rapidly.

• Making Strange Noises

Strange noises coming out of your vacuum also indicate that your vacuum cleaner hose is clogged. These noises come out because your vacuum is making extra effort to clean the surface hence, it starts doing more effort.

Conclusion

Conclusively, the overall functioning of your vacuum depends on the cleanliness and clearance of your hose. If your hose is clogged the working efficiency of the vacuum will reduce. In addition to this, if you are suspecting a clogged hose then just look for signs and symptoms of clogged hose such as noise and reduced suction.

Cleaning the hose is not difficult. You can just use your normal sink, soda and vinegar available to clean your clogged hose.