Traditional pool vacuums utilize suction to collect leaves and other debris from the pool floor. If your ground pool has no filters or you prefer another method of cleaning, you may use a garden hose pool vacuum. These vacuums feature large vacuum bags and utilize a garden hose to create suction.
Pool vacuums remove debris from the pool’s bottom. Swimmers may carry dust and debris into the pools.
Children sometimes dump large bits of garbage into their inflatable kiddie pools while playing. Because professional pool cleaners are expensive, you may want to consider creating your own. A garden hose is cheaper than professional pool vacuum cleaners. It’s a more affordable option if a pool’s pump or filter fails.
Let us first learn how to build a pool vacuum with a garden hose.
How To Make A Pool Vacuum Using A Garden Hose?
Before you can begin constructing a pool vacuum out of a garden hose, you must first get familiar with the equipment required for the manufacturing process. So let’s start with the tools sections and go in-depth with them.
A Garden Hose: To begin, you’ll need a high-quality garden hose of appropriate size and length. You may use a new or an old hose for this purpose, but make sure it extends the full length of the pool from top to bottom, from side to side. As a result, we suggest that you use a garden hose at least 25 feet in length. Additionally, the hose should be free of kinks and tangles to guarantee that water may freely flow through it without causing additional problems.
A Telescopic Pole: Its length varies. The main function of the telescoping pool is to collect trash from the pool water and deposit it in a bag connected to the telescopic pool. After that, you may dispose of the trash in your preferred area.
Vacuum Bag: When you vacuum a pool with a garden hose, the debris may float back into the pool water unless the garden hose has a large enough suction capability to remove the material. As a result, we recommend that you use a vacuum bag. It provides suction pressure to the vacuuming tool and is a part of the vacuuming system.
Because it generates the necessary suction pressure, the debris is held in place and prevents it from being reintroduced into the pool water. Manual pool vacuuming requires it to be an integral part of your process.
Plastic Funnel: For the time being, the tiny outer diameter of the garden hose restricts its ability to gather a large amount of trash. It will, in the end, cause the pool cleaning procedure to be slowed.
As a result, we recommend that you use a plastic funnel to expand the hose mouth. It is OK to utilize a 500 mL drinking water bottle for this task. Simply cut the bottle at a 45-degree angle and use the cut-out as a funnel.
Make sure the garden hose is the right length. When choosing a garden hose, consider the size of your pool. For example, a little inflatable kiddie pool does not need a lengthy garden hose since the bottom is close by. A long garden hose is required to build a permanent pool with deep and shallow ends.
Attach one end of the garden hose to the vacuum bag, then the other. Before proceeding, make sure the vacuum bag is on the right end of the garden hose. Which side of the garden hose connects to the vacuum’s bypass valve determines this.
Most vacuum cleaners come with a dirt and debris bag. Consider using parts from an ordinary home vacuum to build a DIY pool cleaner.
Next, tighten the telescopic handle of the garden hose. The leftover garden hose end may be utilized with the telescopic handle by drilling a handle hole. Problems attaching the telescopic handle to the hose?
Try manually connecting the garden hose end to the telescopic handle. Making a rope knot is one method to do this. Keep the rope clean to avoid dirt in the pool.
Once the telescopic handle has been attached to the garden hose, hold it securely in place and drop the vacuum into the pool with it. Ensure that the handle contacts the pool’s bottom to offer a large surface area for the garden hose.
How To Vacuum A Ground Pool With A Garden Hose
Once your DIY pool vacuum utilizing a garden hose is ready, empty the pool water. It’s vital to keep the pH and chlorine levels in check. It is done without a pump.
So, the technique is often titled ‘how to vacuum a ground pool with a garden hose.’ Among the steps are:
- First, put the garden hose in the pool. Using the telescopic pole, lower the tube into the water. Move the pole gently to reach the pool’s bottom.
- It’s vital to go to the pool’s bottom. So you can easily suction the pool of dirt and other hazardous items.
- Make a plan for where the drained pool water will go before you start siphoning. After directing the other end of your garden hose to the draining position, begin cleaning your pool.
- One hand at the front of the garden hose siphons it. It will generate a vacuum within, and when placed underwater, it will suck pool water and debris through it.
- After creating suction pressure using the siphon method and setting the garden tubing directly beneath the pool water, use the telescopic pole to pull the hose gently.
- The garden hose will scan the whole pool as you move it, collecting dirt from vacuuming.
- To obtain a clean and healthy pool, you should repeat the garden hose vacuum process many times.
- After that, gently withdraw the hose from the pool, disorganizing the connected telescopic pole.
- Finally, clean the garden hose and store them safely.
Swimming pools are great leisure options. Having a pool in your backyard may save you money on summer trips to public pools. Aside from permanent pools, parents may buy inflatable kiddie pools for their kids. Pool maintenance requires meticulousness and dedication. A garden hose vacuum is ideal for cleaning small particles from the pool’s bottom. This technique is inexpensive and effective.