How to Clean Shark Rocket Vacuum?

How to Clean Shark Rocket Vacuum?

While the suction power of a Shark Rocket vacuum is one of the main reasons, anyone wants to buy this vacuum. Hence, it is essential to keep the vacuum cleaner, so there is no blockage to ensure optimum efficiency. The primary cause of blockage on your vacuum is dirt build-up on the filter; for this reason, it is essential to clean the filter regularly. If you don’t keep your Shark Rocket vacuum cleaner clean, it wouldn’t be effective at removing dust and allergens from the surfaces of your home. In this article, we will share a step-by-step guide on how to clean the Shark Rocket vacuum.

Cleaning the Canister

To clean your Shark Rocket vacuum cleaner, you need to start with the canister. The canister is where the dirt and debris are stored. Note that cleaning the canister is not the grossest part of cleaning your Shark Rocket vacuum cleaner. Instead, cleaning the canister of your Shark Rocket vacuum cleaner is the easiest part to do.

Step 1: Power off the Vacuum Cleaner

The first thing you ought to do when you want to carry out any maintenance on your Shark Rocket vacuum cleaner is to ensure it is off. If your Shark vacuum cleaner is not wireless, ensure you unplug it from a power source.

Step 2: Remove the Canister

Next, remove the canister from the vacuum, so emptying all the garbage from inside is easy. To remove the canister, reach under the canister; you will see a latch that holds it in place. Pull the latch, and the canister will come right out.

Step 2: Tap Gently over a Garbage Bin

Now that the canister is out place it over a garbage bin and dump all the garbage inside it. Tap it gently over the garbage to ensure you get all the dirt out. You can also wipe the inside of the canister to prevent odor. Ensure the canister is fully dry before putting it back on the vacuum cleaner.

Cleaning the Rotating Brush

Another part of your Shark Rocket vacuum cleaner that will need to be cleaned is the rotating brush. The rotating brush is that part of the vacuum cleaner that gets the dirt and dust from surfaces in your home. The rotating brush can quickly get dirt, dust, debris, and pet hair, amongst others. Hence it is essential to clean it regularly.

Step 1: Unplug the Vacuum Cleaner.

As we said earlier, the first thing you ought to do is ensure the vacuum cleaner is off. Turning off the vacuum cleaner with its main switch is not always enough; ensure you unplug it from the power outlet to be on the safe side.

Step 2: Remove Debris and Hair

Next, remove the debris and hair from the rotating brush. Removing the debris, dust, and hair from the rotating brush of your vacuum cleaner can be messy. So, if you are worried about the mess, you can put it over a garbage bag. Use a pair of scissors to cut out the pet hair, then untangle it.

Step 3: Gently Scrub it

Use a small brush to gently scrub the rotating brush to remove the last little bits of debris you may have missed.

Cleaning the Filters

Finally, cleaning the filters of your Shark Rocket vacuum cleaner is the grossest part of the job. But the truth is that they are straightforward to clean when you know your way around it.

Step 1: Remove all the Filters

The first thing you should do when you want to clean the filters on your Shark Rocket vacuum cleaner is to remove all the filters. While removing the filters, please note where each filter goes so that you can reassemble them accordingly after cleaning. In addition, you can take a picture of where you got the filter from on the vacuum, so you don’t forget.

Step 2: Tap Gently over a Garbage Bin

Now that the filters are out of the vacuum, tap the filter gently to remove the dust and other debris over a garbage bin; this is an essential step as it reduces the dirt on the filter, thus making it easier and less disgusting to clean.

Step 3: Wash in Warm, Mildly Soapy Water.

In warm mild soapy water, wash the filters and then rinse them properly. You can wash HEPA filters this same way. When washing the filters, be gentle; a little squeeze or rub is sufficient to get the dust out. You can use a mild washing detergent if you want, but it is best to keep the quantity minimal.

Step 4: Allow Drying

Now that you have thoroughly washed the filters and rinsed them, ensure they are well dried before reassembling them on your vacuum cleaner. Even if the filters are only a little damp, do not put them on the vacuum cleaner.

Step 5: Reassemble

As soon as the filters are dry, you can put them back in the vacuum cleaner, and you are ready to go. Please take note that the HEPA filters wear out over time, although very long, so ensure you are ready to replace it once it starts to smell odd.

How often should you clean your Shark Rocket Vacuum?

Now that you know how to clean the Shark Rocket vacuum cleaner, the next question you might have will be how often you should clean it. The interval between cleaning may vary depending on the filter and model of the Shark vacuum cleaner. But as a standard, it is recommendable to clean the filter regularly as every month and ensure you empty the canister immediately after use. You can change filters on your Shark Rocket vacuum at least once every three months.

Bottom Line

To sum things up, owning a Shark Rocket vacuum cleaner no doubt is an excellent addition to your home cleaning needs. What makes it such a great addition is its handy suction power which makes cleaning a breeze. And the best part is that Shark Rocket vacuum cleaners are super easy to maintain.

DMCA.com Protection Status
DMCA Protected & Monitored

There are affiliate links in this post. At no cost to you, I get commissions for purchases made through links in this post.