How to Change the Belt on Kirby Vacuum

How to change the belt on the Kirby vacuum? The belt on the Kirby vacuum plays an important role in its cleaning performance. You will require replacing the belt of the brush once in a while to get the best performance from the vacuum cleaner. This article will help you to do so.

Kirby vacuums are one of the popular vacuum manufacturers in the market. Although being lightweight, they are one of the most durable vacuums you can pick. As per the Consumer Products Magazine, they are the most reliable manufacturer of vacuum and their vacuum can last up to 25 years. Compared to the other vacuum in the market, this is quite impressive.

If you are searching for the steps to change the belt on the Kirby vacuum, search no further. You have arrived at the right place. Below, you will find the step by step guide on how to replace the belt on the vacuum. Keep reading with proper attention to understand the whole procedure.

How to Change the Belt on Kirby Vacuum

As we discusser earlier, the Kirby vacuum is very popular for its efficient performance and long-term durability. However, the performance of the vacuum might be an issue if you keep using the machine without changing the belt. The belt in the vacuum plays an important role by rotating the brush properly while cleaning. With continue cleaning, it can get loose and might not perform effectively.

Typically, the belt of the vacuum cleaner needs to be changed once in six months. You will find the replacement unit for the belt easily at a low cost. Note that changing the belt can be a bit tricky. Below, we will discuss all the steps in steps. Keep reading the article to find out the steps.

Before You Begin

Make sure that you are implementing these safety tips before you begin.

  1. Turn off the vacuum cleaner by turning the power button and unplug the machine from the power source before you start the work.
  2. There can be sharp parts in the machine. You might consider wearing hand gloves while working to avoid any accidental cuts or related issues.
  3. Make sure that your hand is completely dry and moist-free while working.

Step 1

The belt of the vacuum cleaner is connected from inside. So, you will require opening up the machine for this work. The first thing you need to do is to remove the cleaner head from the main compartment. This will make the cleaning easier. After separating the head, you will require lifting the hood from the front part of the body.

Step 2

Once you have lifted the hood, you will find two-colored text on there which respectively says belt on and belt off. Find the plastic lever under the line that is used to turn on and off the belt. Now what you need to do is to twist the lever to turn off the belt and release it from the vacuum.

Step 3

Now find the lever above the plastic lever and turn it. It will detach the plastic head of the vacuum cleaner as well as the belt and the brush. Now find two more levers on the bottom of the headpiece. Turning them will detach the front of the grill and you will get access to the brush.

The next thing you need to do is to utilize the plastic lever to set the brush on mode at the green line. You need to do this to loosen the belt. Now pull out the brush and belt from the head with little pressure.

Step 4

Now you have dissembled the brush from the machine. It is time to replace it with a new one. Before doing so, you might want to adjust the brush settings for the best performance. You will find something like a dial that allows you to set the height of the bristles at different levels.

You might leave it to the normal height as the brush is new. If it is an old brush, you might increase the height for better cleaning as the old brush might be decayed.

Step 5

Now after altering the brush settings, you will set it in its place on the machine. The first thing you need to do is to slide the new belt on the brush to secure it in the middle. After doing that, you should put the brush inside the vacuum head. It should be caught by the magnetic side in the head. Now put back everything in their place including the front grill.

That’s it you are done. After re-assembling the machine, you might turn on the machine to check whether it is working properly or not. Note that if you think the procedure is hard for you to follow, contact customer support. They will help you throughout the procedure. You can even consider sending it to the manufacturer to fix it for you.

FAQs

How to Change the Belt on Old Kirby Vacuum?

Kirby vacuums arrive with the same old technology. So, it shouldn’t be an issue for you to change the belt of the brush of the vacuum following the same steps. However, working with the liver might be a bit hard due to rust. You might use a hammer carefully to work with them.

When to Change the Belt?

As per the manufacturer, you should change the belt of the Kirby vacuum at least once in six months. If you keep using the same brush, it might not remove the dirt efficiently. Because of continuous use, it will wear out and decay which makes it weak at cleaning.

Conclusion

The Kirby Vacuum is one of the most durable vacuums in the market that you can pick. However, you might not get proper performance from the machine if you cannot take proper maintenance of it. Changing the belt of the vacuum is one of the maintenance work that you should do routinely. We hope this article will help you to understand the process of changing the belt on the Kirky vacuum.

DMCA.com Protection Status
DMCA Protected & Monitored

There are affiliate links in this post. At no cost to you, I get commissions for purchases made through links in this post.