Vacuum cleaners are undoubtedly among the most brilliant innovations of this century. They play a significant role in reducing time spent and enhancing the quality of cleaning simultaneously. Kirby stands out as a distinguished company in the vacuum cleaner industry, holding a special place in the market.
The firm has continued to produce high-quality products from its birth to date. However, one major problem that customers are observed to come up with is with its rubber. Let us explore the reasons for your Kirby vacuum cleaner smelling like burning rubber. Let’s dig in
Reason My Kirby Vacuum Smell Like Burning Rubber
There can be countless reasons for this regard. However, the most common sense that you may smell burning rubber is because of its battery.
It means that your vacuums belt has either burnt out or become so stressed out that the roller cannot move, causing the vacuums belt to get overheated from the motors of RPM.
It happens because you probably have opted for an inaccurate belt in your Kirby vacuum. So turn off the plug, disassemble the machine and look for the belt inside. We are pretty sure that you will see a broken one inside.
How To Change My Kirby Vacuum’s Broken Belt
Now, you know the main reason for your vacuum smelling like burning rubber. It’s time to get rid of the problem. But how do you do that?
Well! All you need to do is, changing old broken belt with the new one. Wait, you don’t know to do that? Don’t worry. It is pretty a simple process, and we will teach you that through a short step-by-step guide. Have a look
The Process To Change A Vacuum Belt
Step 1: Access The Vacuum Belt Through The Brush Roll Area
The primary purpose of a vacuum belt is to spin the brush roll to turn the wheels. So firstly, remove the bottom plate by unscrewing all of the screws
Step 2: Remove The Brush Roller And The Old Belt
Now that the bottom plate is taken off, it’s time to remove the broken belt. However, before releasing it, take a careful look at its arrangement in the vacuum and how they connect.
So, pull the brush rollers out and slide the belt out from the loop. Now remove the other end of the belt from the motor shaft.
Step 3: Install The New Vacuum Belt
Install the new vacuum belt by sliding it around the motor shaft. Once you are done with it, thread the brush roller through the other end of the belt.
Step 4: Install The Brush Rollers With The Belt
It is time to return the brush roll and belt to their original positions. Remember, it is probably the most crucial step of the list, so handle it with care.
For the Kirby vacuum that uses round and flat belts, all you need is to pull the brush rollers with your muscle power into the position with that stretched new belt on it.
The step is pretty easy if you do it with total concentration, as a carefully placed belt provides a suitable counterweight.
Step 5: Reassemble The Vacuum
Reassemble your Kirby vacuum cleaner by returning the bottom plat and other housing pieces to their original positions. And voilà, you are done with the process.
Why is it essential to replace the old vacuum belt?
A vacuum cleaner owner needs to replace the old belt with a ne one as it negatively affects its performance.
It causes a vacuum cleaner o to lose its suction power and aids in clog making, that results in a shorter life span of the vacuum cleaner.
Conclusion
For summing up, Vacuum cleaners are one of the most critical parts of any household. They aid in cleaning and save a lot of time. However, a broken vacuum belt is one of the reasons that a person. May smell burning rubber.
One can get rid of this issue by changing the belt. Moreover, changing it is a straightforward process. You can get done with it by following a 5/steps guide that we have listed above. However, stay careful in choosing a new belt and never compromise over its quality to rest assure more extended period.
