Reducing Suction On A Vacuum

The mechanism for functioning behind every vacuum is the suction mechanism. Although there have been many evolutions in the vacuums, the old traditional styled vacuums have evolved into new cordless and robotic vacuums, but the mechanism remains similar.

This suction mechanism itself is derived from various mechanisms which take place inside the body of the vacuum. One of these is the use of refrigerant, which allows the conversion of liquid into gas. This has produced the suction gas, which is responsible for cleaning your surfaces.

Vacuums are majorly classified according to their suction power. Strong suction vacuums are employed for use in a household with carpets and hard flooring. They are also used in industries and companies. At the same time, vacuums with weak suction are used in small apartments and offices with marble tiles.

There are many added features in vacuums together with high suction power. This is offered complimentary with high suction vacuums. These features include multitasking roller brush, cleaning with detergent, and wet vacuum.

A Look At How Can We Reduce Suction On A Vacuum

It is often considered best if you get a high suction vacuum. This is because high suction vacuums often have the feature through which the vacuum’s suction can be increased and decreased. You can use this type of vacuum on various surfaces. High suction power can be used for carpeted floors, while low suction power can be used for marble flooring and vacuuming stairs.

But the question arises that how can we reduce the suction on a vacuum? There is no permanent method to reduce the suction of a vacuum. Instead, there are multiple do-it-yourself methods through which we can reduce the suction of a vacuum cleaner.

• Drilling

Drilling a hole in a tube is one of the most common methods to reduce the vacuum’s suction. This is a permanent method. To reduce the suction of a vacuum cleaner, you can drill the hole in the vacuum tube or vacuum handle.

Next, you can cover the vacuum tube or handle with a collar or seal tape. This way, you can manually alter the vacuum suction by removing the tape or placing it again back in position. One disadvantage of this method is that this is permanent, and suction cannot be restored to the original.

• Removing the Soleplate

One of the ways through which you can decrease the suction of the vacuum is by removing the soleplate. Soleplate is placed at the edge. You can remove the soleplate by turning the slotted keys. One of the essential tips to remove a soleplate is to clean the narrow channel located at the base.

You can clean the narrow channel by using an elongated object. This object can be a toothbrush, a broomstick, or any other long-pointed object.

Reducing the suction is a better option as a vacuum will high suction power will be challenging to move around the house. It will automatically stick to carpets and other surfaces of your place.

• Attaching A Crevice Tool

Attaching a crevice tool will help reduce the vacuum suction power. A crevice tool will help increase the distance between the air production and brush, ultimately reducing the suction power.

You can attach an extension wand or a crevice tool to the vacuum and then place the end tool part into the place where the vacuum’s hose is attached. This crevice tool will reduce the suction power to such as extent that it will be easier to move your vacuum around the place.

How Much Suction Power Is Enough

Usually, moderate suction power is preferred, which is not too high and not too low. It should be optimum enough to clean the surface of your home without sticking it to the surface, such as carpets and floors.

However, if you are looking for a vacuum cleaner to clean the surface of industry, showroom, or office, you should go for high suction power vacuums, which can clean the slightest dirt on the surface.

If you are looking for the best suction vacuum according to the numerical aspects, then vacuum suction of 180 to 200 AW is optimum for an upright vacuum cleaner, 80 to 100 AW is perfect for cordless, and 300 plus AW for the canister.

Why Reduce Vacuum Suction

There are multiple drawbacks to having a high vacuum suction power. Hence, users look to reduce their vacuum strength to make their process easy and convenient with minimizing the cons.

Here are the drawbacks of high vacuum suction.

• Sticking On The Surface

Although high suction vacuums provide powerful cleaning, it sticks on the surface hence, requires much effort to pull it away and proceed the cleaning.

• Requires More time

A high suction vacuum requires more time effort to clean the surface of the vacuum. This is because it has to be lifted time and again to move it forward. In addition to this, the vacuum sticks on the surface; hence, more effort is applied each time to push it forward.

• Noise Generation

One of the primary drawbacks of high suction vacuums is noise generation. High suction vacuums create a lot of noise and echo. Due to this, many people refrain from getting high suction vacuums or opt for getting the suction or their vacuums reduced by any means.

Conclusion

Conclusively, people opt for reducing the suction of their vacuums for multiple reasons. Moreover, high suction vacuums are not suitable for everyday cleaning as they require great manual effort, are time-consuming, and produce much noise pollution.

When choosing a vacuum for yourself, you can research and look for multiple options for optimum suction power for your vacuums. Always consider going for optimum to moderate suction power as they do the needful. They are fast, require less manual effort, perform timely cleaning and make less noise.

You can also look to reduce the suction of your vacuum through multiple methods. Out of all the methods, people use the three most common methods are the drilling method, adding the crevice tool method, and the soleplate method. Except for the drilling method, both other methods are temporary.