Removing Hair From Dyson Vacuum
How To Remove Hair From Dyson Vacuum? In your home, you probably regularly clean the carpet with a vacuum, such as a Dyson.
However, have you ever considered how to remove hair from a Dyson vacuum cleaner? This article shows you how to properly clean your Dyson vacuum, which, in turn, will make sure your carpet is better cleaned.
The Dyson Vacuum Cleaner – How To Remove Hair
When you know what to do, cleaning a Dyson vacuum is fairly straightforward. If you want, you can follow the guide every month or so. Those who vacuum or deep clean regularly may need to do this more frequently.
Step 1. Turn Off & Unplug Your Dyson Vacuum Cleaner
Disconnect the Dyson from the power outlet before you begin disassembling and cleaning it. This will keep you safe. There is also less chance of getting electrocuted.
Step 2. Take Out The Dust Canister & Scrub It
Dyson vacuums are bagless, so you should start with the dust canister. Empty the dust and dirt from the canister first. Dust canisters are usually located underneath cyclones. Press the red “bin release” button near the base to release the dust canister from the vacuum.
To empty debris into the trash, press the dust canister release button to release the base. Shake it vigorously to remove all remaining dirt. Use a damp cloth or microfiber to clean the interior of the dust canister. This helps you capture dust and dirt particles more easily. You do not have to smear them back onto the dust canister.
In case dirt sticks to the cyclones, use compressed air. You do not need to use any harmful liquids, but you can still achieve maximum suction by blasting debris away. It is very important to dry the dust canister as moist conditions contribute to the growth of mold.
Step 3. Clean The Dyson Vacuum Filters
In the air, filters trap dust, pollen, bacteria, and dirt particles. It is necessary to clean Dyson filters regularly. For cleaning, lift the purple Dyson filter located near the cyclone and remove it.
Many Dyson upright vacuums come with several filters, which are on the back of the machine or the “ball.” Run your filter under the faucet and gently squeeze out the water. Repeat this process until the water runs clear from the filter.
Dry the vacuum filter for at least 24 hours before reinstalling it. The Dyson manual recommends you wash the filter every three months. You may need to clean your vacuum filter more frequently if you use your vacuum often and on heavily soiled floors.
Step 4. Time To Remove Hair From The Brush Bar From Dyson Vacuum
The brush bars collect dirt, dust, and hair from your floors and carpets. You may have to remove the soleplate to clean the brush bar depending on your model. For various models, you need a flathead screwdriver to remove the screws. For other models, a coin will remove the screws. You then need to remove the brush.
A second option is to clear the brush by hand. You can then use scissors to remove any hair stuck to the brush. To clean the compartment of the brush bar, use microfiber cloths. If the brush is still wet, be sure to dry it before reinstalling it and fixing the soleplate.
Step 5. Unclog The Dyson Vacuum Hose To Remove Hair From Dyson Vacuum
Over time, a clogged hose will decrease suction power. To clean your Dyson, disconnect the hose. You can sometimes detach it from the wand by pressing a button. You should look inside the hose to see if there is any debris. As an alternative, you can use a mop handle to push the hose through.
Fill a sink with warm water and add 1 cup of vinegar. Let your hose soak in this solution. Then, you can flush it out with water from a faucet. You may find it easier to handle the hose if you hold it in a U shape. Before reconnecting your vacuum, let the hose dry for approximately 24 hours.
Step 6. Wipe Down The Outer Of Dyson Vacuum Cleaner
You should always clean the outer parts of your Dyson vacuum. We recommend dampening a microfiber cloth. Don’t oversaturate the machine. Use vinegar and water to sanitize the wheels and soleplate of your vacuum. Let the Dyson vacuum dry completely before using it again.
Conclusion
It’s a good idea to clean your Dyson every month. This will make it last longer. Always unplug your vacuum before you start. Start with the dust canister and microfiber cloth, then move on to the filters. Clear the brush bar of tangles next. And don’t forget to clean the hose too. Once it’s dry, you can use it again.