The Dyson Vacuum is one of the most innovative bag-less technologies and has the promise of never losing suction. We all know how vital suction power is for a vacuum. Dyson is a vacuum builder who is constantly trying to make their vacuum powerful and improved with users in mind. A Dyson vacuum cleaner is very easy to operate if you know about hose, wand, and attached tools. So a Dyson vacuum how to use the hose?
In this article, we will let you how to use Dyson vacuum hoses and what to do about it. If you do not know the correct way to use the Dyson hose, you may fail to ensure maximum use of your machine. So keep reading this article to know the right way to use the Dyson vacuum cleaner hose.
Dyson Vacuum How to Use the Hose
Generally, Dyson vacuum hoses are straight and long. They are up to 18 feet in length. And their position behind the body of the machine. To use a Dyson vacuum hose, you must first remove the wand. Let’s see how to remove it.
Wand Removal
The handle that you push into your vacuum cleaner is called the wand. It has a long metal barrel that slides inside the other end of the hose. The cuff at the end of the hose edge is stored inside its handle unit. Once the wand is removed from the hose, you can easily reverse it and clean it like a canister style.
The first thing you need to do to release the wand is to press the release latch which is on the back of the body of the machine. You can pull the handle upwards if you want to get the wand out. Moreover, to comfortably detach the wand from the hose, you can take the help of a grip.
Another way is to be able to remove it completely. Press the locking button of the plastic cuff on the hose of the Dyson vacuum and pull it. Then you will see how nicely the vacuum wand is opening from the machine.
Releasing the Hose
When you remove the wand from the machine, now it’s time to release the vacuum hose. There is a button to release the hose. That release button is behind the clear cyclone bin. It is attached to the handle of the clean bin. When you press the release button, these become a bit loose and you can gently remove them.
However, even if you press the vacuum hose release button for a while, it does not want to open. The reason for this is the blockage in the vacuum hose due to not taking care of it for a long time. There is no reason to be afraid.
With a special technique, you can release the hose from the machine. You simply hold the cord at the bottom of the body of the machine tightly. Then press the release button. Hopefully, you can finally open your hose. Now you can clean or replace the hose as you like.
How to Clean a Dyson vacuum hose?
If you do not clean your vacuum hose promptly, its flexibility decreases. And if the flexibility of the tube decreases, there may be a lack of ability to retain dirt. The steps to clean the Dyson hose are as follows:
Step 1
Remove the hose from the vacuum cleaner and place it on a flat surface. Now take a long stick that can penetrate inside the hose. Push it inside the hose. As a result, if an object is stuck inside the hose, it will come out.
Step 2
Now put normal water or soap mixed water inside the hose and shake it well. Then take lukewarm water in a pot and soak the hose in that pot for 30 minutes.
Step 3
After 30 minutes you remove your entire vacuum hose from the pot of hot water and clean it well. When cleaning, make sure that there is no damage to the hose. Note that before drying, continue the flow of water inside the hose. This will deeply clean the entire inside of the hose and there will be no tension to clean it for a long time.
Step 4
Once cleaned properly, it is time to dry. Let the vacuum hose dry on the porch or roof of your home for a few hours. Check after the specified time and make sure the inside and outside of the hose are evenly dried.
Step 5
Now just reset the vacuum hose to the machine.
FAQs
What Is the Size of a Standard Dyson Vacuum Hose?
The Dyson vacuum cleaner will also allow you to use a 32mm to 35mm hose. If I say it in inches, it will be 1.25 to 1.375 inches. The extra hose of this radius will not adjust with the vacuum wand.
How to Release the Handle of Dyson Cleaner?
- Push the handle of the machine forward. Because the vacuum cleaner has to be kept straight and locked
- Now gently pull the handle upwards so that it can extend to the farthest position
- Then press the release button on the housing of the handle and pull it
- Lastly, slide and replace your vacuum handle
Is the Attachment of Dyson Cleaner Compatible With All Models?
The specialty of Dyson vacuums is that most of their attachments are straight, canister type, and handheld. For this reason, it is possible to fit them comfortably in all other models. But there are some older models of machines that may require a separate adapter.
Conclusion
To use the Dyson vacuum hose you need to remove the wand. Then simply disconnect the vacuum hose by pressing the release button and use it at your convenience. Remember hose is a pressure relief and also helps to complete the dirt removal process properly. So take care of the hose if you want to get an ideal vacuum service.
