How to Empty Dyson Ball Vacuum?
Owning a Dyson ball vacuum comes in very handy in the house. But like every other type of vacuum cleaner, after using them for a while, chances are it will start to accumulate some dust. When you notice a buildup of dust and dirt on the inside of your vacuum, it is wise to take it apart for proper cleaning. If you don’t know how to empty a Dyson ball vacuum, read on, as we will be explaining everything you need to know about cleaning a Dyson ball vacuum as a beginner.
How to Empty a Dyson Ball Vacuum?
Cleaning a Dyson ball vacuum cleaner relies on your ability to take it apart. It would be best to have a dry towel, a Dyson combination tool, and a small toothbrush to empty a Dyson ball vacuum. After that, follow the steps below to empty a Dyson ball vacuum.
● Detach and Clean the Debris Bin and Cyclone
When cleaning your Dyson ball vacuum, you should first take to remove the debris bin and cyclone. Ensure you wear a mask and glove when working with dust. To remove the cyclone, press the red latch on the top of the vacuum. To empty the debris bin, press the red lever again to release the bottom of the canister to dump its content. It happens fast, so ensure you close your waste bin around the debris bin before you release the bottom. If all the debris doesn’t come out of the bag, use something long to loosen it.
● Remove and Clean the Flters.
With the debris bin out, the next thing to do is to clean the filter. We recommend cleaning the filter at least every two months for proper maintenance. There are two filters in a Dyson ball vacuum, a pre-filter in the cyclone and a post-filter in the ball. To remove the pre-filter, flip up the tab connected to the handle of the cyclone. Once uncovered, pull it straight out. To remove the post-filter, turn the vacuum on its side and spin the center cap counter-clockwise. Once free, remove the outer shell and get the filter out. To clean the filter, run them under cold running water until the water runs clear.
● Detach and Clean the Vacuum Head
After cleaning the filter, you need to detach the vacuum head and clean it. To remove the vacuum head, turn it to its side and remove the c-clip on the connection between the body and the vacuum’s head. On both sides of the head, there should be levers to release the bottom plate. When the bottom plate is free, you can then remove the roller and empty any loose debris. Use a brush to clean off any excess dirt on the barrel of the roller. Cut things like rubber bands, hair, and strings with scissors as they may wrap around the spinning brush. After that, use a damp cloth to clean the inside of the headpiece.
● Disconnect and Unclog the Hose
Next, focus on cleaning the vacuum hose. The hose is commonplace for clogs to happen. As such, you ought to clean them regularly to keep the vacuum working at peak performance. To properly clean the hose, you have to detach it. Near where the hose connects to the vacuum, you will see a small release button on the base of the hose. Hold the release button and pull the hose to remove it. Once out, use a long tool like a mop stick or broom handle to knock loose any stuck dirt inside the hose. For deeper cleaning, you can rinse or wipe the inside of the hose with a damp rag over the broomstick.
● Reassemble the Vacuum
Lastly, put the vacuum cleaner back together, but ensure all the parts are clean and dry. First, place the filter back in position, then replace the shell cover over the post-filter by turning the knob clockwise. Next, snap the clear barrel back onto the cyclone center so that you can slide the debris canister back into place in the vacuum. Anything that is secured with a latch or release button should make a clicking sound to complete. Align the head correctly and slide it back onto the base. Lastly, click the hose and base back into position.
How Often should you clean your Dyson Ball Vacuum?
Now that you know how to empty a Dyson ball vacuum, the question is, how often should you do it? While you can wipe the exterior of the vacuum cleaner without tearing it down, you should also note that you need to clean the interior as well. We recommend cleaning it at least once every two months. You can clean the filter every other month to increase the performance of the vacuum and longevity. Other pieces like the hose and head can be cleaned as needed or every other month as well.
Can I Wash a Dyson Canister?
Yes, you can wash the Dyson canister as soon as you have detached it completely; this is important because there may still be some dust build-up on the inside of the bin. To wash the Dyson canister, use warm soapy water and a rag or sponge to clean any remaining dirt. Allow the Dyson canister to dry manually or let air dry completely before you reassemble the vacuum.
How long does the Dyson Vacuum Filter Last?
According to Dyson, the vacuum filter should last about a year or a little over 4000 hours in total. Even though you can empty the vacuum and clean the filter regularly, it is advisable to change it once a year. This is to ensure the filter is working at maximum performance.
Bottom Line:
If you don’t already own a Dyson ball vacuum cleaner, what are you waiting for? Browse through the several models of Dyson vacuum cleaners to find the right one for you. While each Dyson vacuum cleaner has a unique design, they all need regular cleaning to keep them optimally working. Cleaning a Dyson ball vacuum cleaner is pretty simple. The clips and buttons are easy to spot and help guide you to remove the pieces. The process will kick up a lot of dust, so ensure you wear a mask as you clean.
