How to store Central Vacuum Hose?

Disclaimer: There are affiliate links in this post. At no cost to you, I get commissions for purchases made through links in this post.

Learn about How to store Central Vacuum Hose?

Many people have a central vacuum system in their homes. The hose can be stored in several ways to keep it safe and secure. Well, it is important to keep it working for years.

How can you store your central vacuum hose? If you ask yourself this question, there is no need to worry. We have the answer for you! Read on below and find out how to store central vacuum hose correctly.

What is Central Vacuum Hose?

A central vacuum hose is a long, flexible tube that allows you to attach your cordless or non-coded vacuum cleaner. The central vacuum system consists of components like the inlet valve, pipe, and suction end (attachment).

One end of the hose is connected to an inlet that will be attached to the main unit through two clamps. This clamp can also serve as a handle, so it’s very easy for people to vacuum their homes.

Why is it Important to Store Central Vacuum Hose?

It is important to store the central vacuum hose properly so it can withstand all kinds of weather. This will also ensure that your system will last for many years. We are pretty sure that you don’t want any damage or rust on plastic, metal, and rubber components.

How to Store Central Vacuum Hose?

There are several ways to store the hoses, but here are our top three recommendations:

Method #1

Coil up the entire length of the hose in a loose looping motion starting at one end. Besides, make sure no kinks remain inside (kink-free). Make this coil bag by inserting both ends into each other like making an overhand knot with them. After that, pull tight forming loops around itself till complete. The first few coils may be difficult to do, but this will be easy once you get the hang of it.

Method #2

Coil up just half or one-third of the hose only then fold into itself at least five times for small hoses. Also, six to seven folds are needed when dealing with larger ones. Then store them in a container with holes on its side so air can circulate inside (such as an empty shoe box). The coil should lie flat within the container because if not, it may kink while being stored long term.

Method #3

Coiling is also possible using your vacuum cleaner unit by removing both ends from their clamps. After that, create loose loops smaller when storing manually without anything around. The loops are then held together by slipping the hose ends back into their clamps to secure them in place for storage purposes.

How Often Should Central Vacuum Hoses be Coiled?

Central vacuum hoses should be coiled up at least once a month, if not more often, depending on how much you use them.

This will ensure that your system stays clean and free of dirt, dust, debris, or anything else. Your negligence can damage the components over time due to rusting (metal) or cracking (plastic). You always want to make sure everything is perfectly intact before storing away until the next use.

What Can Happen When Central Vacuum Hose isn’t Stored Properly?

Many homeowners may encounter one problem when they don’t coil up or store their hoses properly: the hose can become tangled inside.

The coils may also get kinked because of this, which will prevent them from expanding back to their original length when vacuuming your home again.

If you don’t stretch out and straighten all parts before storing away, they could deform (rounding) too much due to tightness after time passes, leading to improper suction.

This means if something gets stuck in the middle of the tube like a sock. For example, your vacuum cleaner unit won’t be able to pick it up effectively anymore as intended, especially on high power mode where more suction is needed!

How Long Can Central Vacuum Hose Last?

Central vacuum hoses can last a surprisingly long time if taken care of properly. The rubber tube material itself should be able to stand up against weather elements. Like rain or snow for many years without developing any rust, the metal clamps holding them together won’t corrode either.

However, some other components will need replacing from time to time, such as the inlet valves and hose connectors (the couplers). These tend to fail because they receive so much wear and tear while people vacuum their homes day after day using it frequently.

This is why you want your system serviced every year by a professional technician. It is because they know how to do this safely and correctly with no added damage whatsoever. That way, everything remains intact even when stored away longer than just a month or two.

Are Central Vacuum Hoses Universal?

Yes, central vacuum hoses are universal and can be used with any system as long as it has the right connectors to match up.

A few brands don’t work well together because of design differences. But, this is very rare and not an issue unless you’re trying to mix something old with new.

The only time you’d need different parts would be if your current hose or attachments were no longer working at all. It means they’ll have to purchase those instead for replacement purposes, whether home depot or an online source such as Amazon (or similar).

This will allow them to use their accessories again without needing help from anyone else, even when connecting things differently than before.

Conclusion

We hope that you know how to store central vacuum hoses properly after reading this blog post. So now,  you do it as much as needed to ensure the best performance outcome.

If you do not coil up or store your unit properly, there is a chance that major damage will be done over time. It can lead to poor suction power and even total failure altogether. Be sure to check out our other blogs for more helpful tips on keeping everything in tip-top shape!

DMCA.com Protection Status
DMCA Protected & Monitored
error: Content is protected DMCA !