How to Vacuum Seal Liquids?
Do you know you can vacuum seal liquids and gravies? Yes, there are several methods to turn the nightmare of sealing liquids into a sweet dream. Sealing up dry food is not a tough job, but it becomes whole labor when you think of vacuum sealing the liquid stuff like gravies, etc.
Vacuum sealing liquid materials can be nasty and unsafe if you do not know what you are doing. The most severe issue with vacuum sealing liquids is a faulty seal that cracks before you can even extract it. However, you don’t have to be concerned about it any further. Applying the tips and tactics described here, you may master how to vacuum seal liquids ideally.
Different Ways to Vacuum Seal Liquids?
Vacuum Chamber
A chamber vacuum sealer performs effectively since the air within the vacuum bag decreases at the same pace as the cylinder’s pressure. As a result, the material remains within the bag rather than getting pulled out through the hole.
While using the vacuum chamber, ensure that the liquid within the bag is at room temperature. The heat capacity of the liquid decreases as the air inside the chamber decreases, which might lead the fluid to burst out from the container.
Why is Vaccum Chamber Sealing Good?
- It creat no mess at all.
- You do not need to wait between sealing
Why is Vaccum Chamber Sealing Not Good?
- The chamber vacuum is expensive
- Warm liquid can lead to disaster
The Freeze Method
The ordinary vacuum sealer can also let you seal the liquids efficiently. However, it would benefit if you had a little more practice and skill to do it perfectly.
For sealing liquid, you should put the liquid stuff in the vacuum bag. After that, please put it in your freezer and let it completely frosted. Then, when the liquid turns to ice, you can vacuum seal it just like any other solid food. This way you will feel no difficulty at all. Still, if you can not stand the vacuum bag in the freezer, we illustrate another method below.
Why is the Freeze Method Sealing Good?
- Any ordinary vacuum sealer can do the job
- You will have no mess at all
- It is cheap and handy
Why is the Freeze Method Sealing Not Good?
- It will ask for extra time for freezing
- You can not do it if you have less freezer space
The Ice Cube Method
If you cannot stand the vacuum bag in the freezer, try this method. Here you will need some ice cube trays and, of course, the freezer. First, pour the liquid into the ice cube tray, and place it in the freezer until it completely frosts. Now pop out the liquid ice cubes and pour them into the vacuum bag, and finally seal with any ordinary vacuum sealer.
Why is Ice Cube Method Good?
- You will do it without any mess
- Any vacuum sealer can do the job
- It will not take much space for a freezer.
Why is the Ice Cube Method Not Good?
- You have to wait until it freezes
The Paper Towel Method
The paper towel approach may appear unusual, but it truly works. First, fold few sheets of paper towel into a flattened strip the exact length of the package you’re sealing. Then, position the paper towel over the vacuuming sealer’s top; however, keep in mind it should not become stuck.
If the paper towel absorbs any liquid that seeps out as you close your bag, you deploy. Now it is time to remove the paper towel. Although it is OK to keep it inside, you may choose to remove it, and that there is a method for doing so.
If you wish to extract the paper towel once the liquid has been closed in, you’ll allow a bit more bag room than you usually leave. You should vacuum seal just above the paper towel and afterward trim off the piece containing the paper towel when your package is sufficiently sealed using the additional space.
Why is the Paper Towel Method Good?
- Any vacuum sealer can work.
- No preparation time is required.
Why is the Paper Towel Method Not Good?
- It has chances of disaster.
- Peper towel strip can stay inside the vacuum bag once you seal
The Gravity Method
You’ll probably need another person for this one because you’ll have to dangle the vacuum bag above the countertop while vacuum sealing it. The fluid will remain in the bag’s base, far from the opening of the vacuum bag
; this will be much simpler if one individual is in charge of the controlling vacuum sealer and the other is carrying and lifting the bag. Things will get ugly if you don’t react quickly enough on the buttons to stop the vacuum operation at the appropriate time.
Why is the Gravity Method Good?
- You only need a vacuum sealer and bag
- An ordinary vacuum sealer can get the job done
Why is the Gravity Method Not Good?
- The help of other person needed
- You might get in trouble if you don’t act quickly.
Liquid Blocker
The Liquid Blocker is a tiny, customizable band of plastic that goes in the upper part of your vacuum bag and therefore is intended for vacuum clamshell sealers.
Put the Liquid Blocker directly on top of the foodstuff and pressure seal the bag as usual. The plastic strip enables air to escape the bag while also acting as a barrier, preventing liquid from entering the sealer.
You might require an additional liquid blocker if you intend on closing many bags because the pouch must be shut just above the blocker, locking it within.
The plastic strips are reusable and customizable and will go within vacuum bags up to Fifteen inches wide; then, when you’re finished with them, disassemble them and throw them dishwasher.
Why is Liquid Blocker good?
- It is reusable and adjustable.
- You can freeze it
- Work with any size of the bag
Why is Liquid Blocker Not good?
- It entails chances of disaster
Bottom Line
It’s been determined that vacuum sealing liquids can become a problem; however, you’ll be fine as soon as you learn to do it correctly. Any nightmare stuff you read is probably from those who didn’t do their homework before preserving their liquids.
Taking the recommendation above will provide you with adequate expertise. And chances are, Soon after, you may see yourself devoting time to teaching someone else how to vacuum seal the fluids correctly.
https://youtu.be/2fcFQDH76rQ
