How To Shorten A Vacuum Belt

A vacuum cleaner, considered as a hoover or vacuum, is designed to suction different things such as dirt and dust, pet hair, skin flakes, cleaning carpets and windows. It is an electronic machine which has made our lives easier and hassle-free. Cleaning never sounded this easy before.

What Are Vacuum Belts Made Up Of

Vacuum cleaner belts are made up of rubber. Rubber is a material generally used in manufacturing a wide variety of products, from belts, gloves, shoes, and other things we use daily. However, continuous use of these rubber-made products stretches them because of which they become less effective.

Rubber is a common elastic substance. It shrinks when exposed to excessive heat. We can also shrink rubber by exposing boiling air to it or by using hot water. It will work magically and be back in its shape and size.

Luckily the rubber molecules have properties that can shorten them by exposing them to excessive heat. The amount of heat determines how much the product will shorten.

How To Get The Desired Length

There are many ways to shorten a vacuum cleaner belt to get the perfect size you want. Note that you should be doing it the proper way. Luckily there are a few methods that would help you.

  • Shortening With Hot water

The best way to shorten a vacuum belt is by using hot water. As rubber shrinks itself when exposed to heat. You can place it under hot tap water and let it work. The heat will help the belt shrink and shorten its size in a few minutes without cracking it. Make sure the water is not too hot for your hands. Later dry it with a towel or a cloth and check the size.

  • Using Boiling water

Place the belt in a pot full of boiling water and leave it inside for 10-15 mins. This excessive heat will help the belt to shorten way quicker. Boiling will return the shape of the belt into desired size and shape. Remember to check the belt while it is boiling for any tears or debris.

  • Bend The Belt In Its Shape

The belt must be dried and bent in the shape and size you want before it cools down. Make sure you do it quickly before it gets cold.

  • A Blow-dryer For Shortening the Belt

For this method, you need a heat-proof surface. It should not have any contact with the rubber while you heat it. Also, make sure to wear anything like a mask or eyeglasses to protect yourself from heat and dust. Set the blow dryer on the highest number.

Now start blowing it on the belt. Try to be uninformed. Do not blow the heat in one place only. Spread the heat around evenly so it shrinks appropriately, giving a proper size. Avoid touching it before it cools down. Use gloves to check.

 How to Take Out The Vacuum Cleaner Belt

 Now that we have dug in how to shorten the vacuum belt, we must know how to take out the vacuum belt. Below are a few steps you need to follow.

Step 1: Access the vacuum belt and the brush roll area. Open the brush roll area and remove the bottom plate on the cleaner.

Step 2: Now, remove the brush roller and the belt. Before you take out the belt and the roller, make sure you remember how it was fixed.

Step 3: The belt on the vacuum is a flat belt held between the motor shaft and the roller. Remove the brush roller and then slide it from the belt loop. Then remove the other end connected to the motor.

Step 4: After shortening the belt to the desired size, install it back again.

Step 5: Install the brush roller back along with the belt in its correct position again.

Step 6: Last but not least, reassemble the vacuum again.

 Vacuum cleaner belts are not difficult to handle. You just need to follow these easy steps very carefully without hurting yourself and you are good to go. There are different vacuum cleaners available in the market, but surely, they will have the same procedure to follow.

 But if you are unsure of shortening the belt, you can always replace it. Vacuum cleaner belts can be changed at home similarly as they can be shortened.

Conclusion

So, as discussed, vacuum cleaner belts can be shortened and resized using different methods at home without being worried about the replacement or getting a new one. All you need to do is master the skill and you will be good to go.

Lastly, keep your vacuum cleaners clean and properly as they need good maintenance and care. Monthly check the belts and other parts for any future problems.

DMCA.com Protection Status
DMCA Protected & Monitored

There are affiliate links in this post. At no cost to you, I get commissions for purchases made through links in this post.