A vacuum sealer is a great way to preserve your food for longer than usual. Compared to the usual vacuum cleaners, the vacuum sealer can help you to store your food around three to five times more. Furthermore, this tiny device also helps to preserve the freshness of the food. Vacuum sealers typically work for a long time without any issues. If your vacuum sealer is not vacuuming correctly, keep going through the article.
Below, we will discuss some of the possible reasons behind the vacuum sealer not vacuuming issue. Keep going through the article to find out the reason that is causing the problem.
Reasons Why Your Vacuum Sealer is not Vacuuming
Vacuum sealers help keeps your food fresh and intact. However, if your vacuum sealer is not maintained properly, there may be some problems with the sealer. Especially in its vacuum sealing properties. Sometimes you will notice that the device is not vacuuming as it did earlier. This can happen if water or juice enters your vacuum sealer. Occasionally the sensors in the vacuum sealer stop responding. Due to which your vacuum sealer cannot vacuum properly.
If you notice that there is a small problem with your vacuum sealer. Read these simple troubleshooting solutions to fix your vacuum sealer, instead of calling customer service. Typically, a vacuum sealer has only three parts. If a part is defective, it can be easily removed. Below, we will discuss some more similar problems with vacuum sealers.
Check the Suction problem
The suction system of the vacuum sealer draws air and moisture from the storage bag. As a result of air around the food is withdrawn, your food stays fresh and good. When there is a problem with any part of the vacuum sealer, your food will be wasted. If you notice that a problem with the vacuum sealer, check the following things first:
- First, make sure the latch is completely closed. Also, make sure that the latch has no debris, it is completely clean. If there is dirt or debris, clean it thoroughly with a damp cloth.
- Open the lid and check that the gaskets are in place. Also check if there is any debris in the gaskets, if there is dirt or debris remove the gaskets and clean them. Then, Re-insert the gaskets in their place.
- Be sure to disassemble the accessory hose before starting your vacuum sealer. If you are using an accessory hose, open the bottom panel of the hose and check to see if the vacuum tubes are still connected. Check that the lid is off and that the LED indicator light is on.
Check your vacuum Sealing Bar
Vacuum sealers are used to seal and store food items. However, when the “sealing” part of the vacuum sealing process is defective, the vacuum sealer no longer works well. Sometimes your vacuum sealer does not seal well. These problems may be due to several reasons, which are given below:
Try to Package Well
When you put pressure on the vacuum sealer to seal the food items, sometimes water, oil or juice comes out of the bag and falls into the vacuum sealer. For this, your vacuum sealer sealing is not suitable for use and it can be ruined. So check carefully when packing food items, to see if there are any small leaks in the bag.
Be careful when placing food items in plastic so that no water or oil spills. And remove excess moisture from the food with a towel before sealing the plastic bag.
Don’t overfill your bag
Never fill the bag when packing food. When packing food, leave at least 1 inch of space between the edges and the food. This is enough space to seal the food well. If the bag is full, the bag may burst due to the pressure of the ceiling. Always try to seal dry-type food. Sealing liquid-type food with a vacuum sealer is bad for your vacuum sealer machine.
Clean Your Seal bar
Make sure there is no dirt on the seal bar or gasket. If there is dirt you can clean them with a damp cloth, finish cleaning and dry the place well. Before starting the sealing process, make sure that the wet place is dry. If not dry, dry it with a cloth and then re-insert it into the unit.
Check the Power
- Unplug the vacuum sealer from the power line and check the sealer outlet before checking anything else. Now re-plug the vacuum sealer cord. If you don’t see any changes, install a different device at that outlet to see if it works. Vacuum sealer outlet doesn’t work, you should try a different outlet.
- Attach the cord firmly to the vacuum sealer and inspect the cord with the loose wire. If there is a problem with the cord, you will not be able to do any work with the vacuum sealer. Buy a new cord and attach it to the vacuum sealer.
- Some portable vacuum sealers are battery-powered if yours are battery-powered. Then check if the vacuum sealer battery is charged. If the vacuum sealer battery is not charged, charge the battery first. Notice if the LED indicator light is on while charging. If the LED indicator light does not light up. You will need to buy a new battery for your vacuum sealer.
Other Problem
Even after sucking, sealing, and power failure, your vacuum sealing can cause problems for a few more reasons. Sometimes you will find that the LED “tray-full” light of your vacuum sealer does not turn off. This is due to the dampness on the sensor of the vacuum sealer. Try drying the part with a hairdryer or blow dryer. Then wipe the sensor thoroughly with a dry cloth.
Conclusion
These are some of the common reasons behind the vacuum sealer not vacuuming properly. We hope you will be able to troubleshoot the issue following this article. If nothing works, you should call the customer care service. They might help you to solve it.
