Various Steps on How to Put a Belt on a Kirby Sentria Vacuum
The most commonly used homely appliance in most houses nowadays is a vacuum cleaner. It is not only beneficial but also a highly demanding gadget. Though it is mainly used to clean your home, it has other household applications. For efficient cleaning, you have to know how to use most of your vacuum cleaners for a hassle-free homely issue.
There are many models available in the market to choose from from different vacuum cleaners. Kirby Sentria is one of the efficient models amongst them.
Generally, you can fix a problem with a Kirby Sentria vacuum cleaner with a snap of your finger. You don’t need to know rocket science to fix it. But in some cases, you need to replace some significant parts of the Kirby Sentria vacuum cleaner or all of it. However, some of you might get stuck when it comes to changing a Kirby Sentria vacuum cleaner belt and putting it back on.
Let’s have a look at what could be the answer to your question on, “How to Put a Belt on a Kirby Sentria Vacuum?”
Step by Step Instructions on How to Put a Belt on a Kirby Sentria Vacuum
Though Kirby Sentria vacuum cleaner is a well-built, tried-and-tested cleaning appliance found in most homes, some parts may wear down because of its extended use. You can take the belt attached to the brush roll as an example. To perform efficiently, the rolling mechanism of the brush is crucial. However, if the belt requires changing, it is not that hectic job to worry about. You can change it and put it back on if you know how to do it.
But, before starting the search for the possible malady, double-check that your vacuum cleaner is unplugged and its power switch is turned off. As you know, “Safety First,” so always operate with gloved hands with no moisture in them.
Let us help you by sharing with you some easy steps.
Step 1
Check again if your Kirby Sentria is unplugged from the primary power source. You do not want yourself to get electrocuted, do you? Okay, now lift the lid of your vacuum up.
Step 2
Look closely at the powerhead. You will see a sticker with a green indicator marked as “belt on” and a red indicator marked as “belt off.” You will find a round piece in front of you which is called a “Belt Lifter.” Look for a green indicator on the top of it. By following the green arrow, lift the metal tab on the front of the belt lifter to turn it into an L-shaped handle. Use this L-shaped handle to rotate the lifter to the left until it gets aligned with the red arrows. After rotating this handle, you might need to fold it back in place.
Step 3
You need to detach the nozzle from the body of the vacuum cleaner to access the belt. For that, rotate the supportive lock counterclockwise. It will make the nozzle lean forward. Then, you can easily remove it from the vacuum cleaner.
Step 4
Now, turn the nozzle upside down, and you will see a rug plate attached to the bottom of the nozzle. Through it, you will be able to see the brush roll and the belt attached to the roll. You can find a couple of clasps at the posterior part of the nozzle, which can be turned to unlock the rug plate. Turn those clasps to the left to open the rug plate and remove it.
Step 5
In this step, you need to pull the L-shaped handle out again. Rotate this handle clockwise (to the right) until it gets aligned with the green arrows. It releases the tension from the belt attached to the brush roll. Make sure that you notice the height setting of the brush roll adjusted before taking out the belt and the brush roll. Why is it important to remember the numbers on both sides of the brush roll? You see, these numbers (1, 2, and 3) are the adjustment setting of the brush roll to the surface which needs cleaning. If the adjustment is not made correctly, then you will not get the most out of your Kirby Sentria.
Step 6
Hold the brush roll and the belt and pull them out from inside of the nozzle. Remove the wear-off belt from the brush roll by sliding it out. Place the new belt back in the brush roll and slide it in the inside of the nozzle back again. Don’t forget to adjust the height setting of the tab of the brush roll as it was before for efficient cleaning. Most of the time, it is set to neutral. You can adjust according to your floor type.
Step 7
Place the newly replaced belt in the middle of the roller brush to tightly hold the brush and not displace it during function. Reinstate the rug plate at the bottom of the nozzle correctly and turn the rotating clasp to the right to close the rug plate.
Step 8
The remaining steps are just simple. You have to go back from where you have started. All you have to do is to align the red arrows. Why align? Because it will tighten the belt and make it refasten to the Kirby Sentria. To attain this, rotate the L-shaped handle counterclockwise of the belt lifter. Restore the nozzle to the body of the Kirby Sentria by attaching it back and rotating the supportive lock clockwise. Use that L-shaped handle again to rotate the lifter to the right until it gets aligned with the green arrows. Make sure to adjust the vacuum’s height so that the powerhead can be easily tugged back in. Now, put the lid back on, and you are set to go.
Conclusion
By now, you already get to know how to put a belt on a Kirby Sentria vacuum. Regular checking of the vital parts of the vacuum can increase the functionality of your vacuum cleaner and increase its longevity. Because of the availability and cost-effectiveness of the belt of the Kirby Sentria, you can easily replace it by yourself. Contact the service providers near you if you find it difficult to remove or replace any part of the vacuum cleaner.
