A roller brush is a fundamental piece of a vacuum cleaner. Regardless of whether yours is made of metal, plastic, or wood, it is inclined to get ruined and you will require it to be eliminated for cleaning. Some cutting edge vacuum cleaners are self-cleaning, which means you don’t need to isolate them for cleaning purposes. 

Notwithstanding, you’ll discover this article helpful on the off chance that you need to eliminate a roller brush for substitution. Vacuum cleaners need simply a basic upkeep administration to work well for you for more. A straightforward errand as eliminating the roller brush for cleaning, upkeep, or substitution might save you a useless vacuum cleaner. 

Removing The Roller From Your Vacuum

Cleaning the brush roll is a vital piece of keeping any Shark vacuum running its best. 

The Duo Clean is a great apparatus for cleaning hard floors due to its effectiveness and the splendid LED headlights that help an incredible arrangement in the following residue. 

Notwithstanding, one issue with the Duo Clean spout, essentially the prior ones without Zero-M, is hair folding over the brush roll. 

It will not wrap on the roller, yet on the brush behind it, so it’s vital to eliminate any hair and other stuff that might obstruct wind current. 

Step By Step Instructions To Eliminate And Clean Roller Brush 

Steps for different models might change, so utilize the data you see here as an aide. 

Eliminating the roller from the ION P50 is a basic cycle, and you’ll require one instrument – a coin sufficiently wide to eliminate the three bolds under. 

Stage 1: Detach The Main Nozzle 

The initial step is isolating the cylinder from the casing by pressing a button to deliver the lock. 

After eliminating the cylinder, press the hook over the residue holder to eliminate it from the edge. 

This means to eliminate the majority of the mass away from the spout, so it’s simpler to clean. 

Stage 2: Removing The Roller Brush 

In the ION P50, there is a delivery lock on one side of it with a “discharge roller” composed. Delicately push it forward to deliver the roller. 

Try to have the spout low to the ground or have one more hand to get it, so it doesn’t drop to the ground. When you push the switch, the roller jumps out. It’s something to remember. 

When you have the roller out, it’s simpler to clean. 

Shark prescribes just utilizing water to wash the roller and drying completely before returning it to the vacuum. 

Stage 3: Remove Three Bolts 

For the ION P50, cleaning the roller will be simple since it jumps out. In any case, the brush behind it doesn’t. So you’ll need to eliminate the plate by loosening three bolts. 

You could utilize a flathead screw, yet a coin with sufficient width ought to do the assignment. 

After eliminating the brush monitor, you’ll have more space to eliminate any hair utilizing scissors and other trash sticking to it. 

There are grooves across the brush, which makes this undertaking simpler. 

Stage 4: Cleaning Other Areas Of The Nozzle 

You’ll likewise see dust and different foreign substances staying on the different little hiding spots. One effective approach to clean these regions is by utilizing a handheld vacuum with a brush connection. 

For this step, utilize the Roborock H6 stick vacuum. It accompanies a brush connection that is great for this errand. 

Make a point to clean the two major wheels behind the brushes since the soil will stick on it and a wellspring of scratches on hardwood floors. 

Remember to check the little wheels along the edges of the watchman as the dirt can develop there. You can go through a moist material to clean these parts and to eliminate any foreign substance or hair. 

Stage 5: Reattach Brush Guard 

In the wake of cleaning the brush, reattach the brush gatekeeper and screw on the three latches. Don’t over tighten it as it effectively strips since it’s a plastic part. 

Stage 6: Reattach The Roller Bar 

Next is appending the delicate roller bar and securing it. The roller just heads a particular way, so it’s a beautiful imbecile verification. 

Stage 7: Attach The Cylinder

The last advance is to reattach the cylinder on the edge in its upstanding design. 

Note that eliminating the roller on different models like the Shark APEX and NV-800 series. The vast majority of them will have discharge fastens that push it out.

Conclusion

The procedure to take out a roller from a shark vacuum is very simple. Follow the above mentioned steps and do this method at home without the help of a professional.