How to Put on a Kirby Vacuum Belt?

Are you having trouble changing your Kirby Vacuum belt? In this video, we will show you everything you need to do this at home. Kirby vacuum cleaner is a well-made cleaning machine, but after using it for a long time, some parts will start to rot. For representation, as the belt on your Kirby deteriorates and spreads, it will cause the brushing method to stop working very well. Fortunately, the belt is manufactured for simple replacement without tools.

Important Safety Tips:

Make sure the vacuum machine is not connected. For newer models, uninstall the TechDrive feature by laying the foundation in the “neutral” area. Press the pedal adjustment pedal to its lowest position to lift the power pipe to the highest level.

Always make sure your machine is not connected and that the power button is off before repairing your vacuum.
Always make sure your hands are dry and moist before repairing your machine.
Be sure to wear gloves when adjusting your machine to prevent any cuts or scratches.

If you are not feeling well in your vacuum, please do not hesitate to contact customer care, and they can assist you in this process, or you can send us to fix it for you.

Instructions:

The important aspect you want to do is lift this lid.

If you look at the electric head, you will see a sticker. It has a green arrow marked “belt on” and a red arrow marked “belt off.”

A round piece on the front lifts the Kirby Vacuum belt. If you look up, you will see that it also has a green arrow.
Now lift the metal tab in front of the belt lift and turn the handle!
Now you can quickly turn it over to line up the red arrows.

Fold the tab back down and open the release pad. The powerhead will drop.
Look inside the head, and you will see that the belt is connected with a hook. This is how you lift the belt off the belt and allow you to remove the powerhead.
Open the powerhead tabs to “unlock.”

You can now remove the plate. This provides you a full ticket to the brush roll and belt.
Hold the roll of the brush and belt and pull it out.
Skid the vacant belt and slide the new one.

Pay intimate interest to the tabs on each side of the brush. Their sides are numbered from 1 to 3, and one side is also more significant than the other.

How High or Low you want your Brush to Sit On?

Numbers are an excellent adjustment to how high or low you want your brush to sit on. If you have a high pile carpet, you will probably want both of them in 1. If you have a very low pile carpet or solid stairs, you will probably need it at 3. Most of the time, we have it in 2.

So set both tabs to the number you want. Slide the brush input brush. Remember that one side is bigger than the other, so it fits nicely in another way!

To return the belt to the hook, use your belt holder and line up the green arrows.
Now hold your belt and hold it tightly on the brush roll.
Turn the elevator facing red, and you should see and feel when holding the belt. Keep twisting until the red arrow is in line.

Place the plate under the powerhead. The beginning skates on the powerhead slots, and the two tabs go backward.
To make it easier for the powerhead to return to it, raise the machine height all the way up with the height solution.
Attach the hooks behind the powerhead to the bar in the vacuum.

Please open it and lock it in its place.
Turn the lifting strap to adjust the green arrows.
Close the lid, and you’re done!

What does the Green Light mean on my Kirby Machine?

When you turn it on, the green indicator light should glow green. That means the brush roll rotates. You may also have purchased an improper brush roll, or your Kirby microphone mouth comes from a different source, and the indicator light is on the opposite side.

How long do Kirby’s Cleaning Bags last?

Also, how long will Kirby last? A well-cared-for Kirby should take 20 years, although many Kirby’s stories last a very long time. Usually, in 20 years, the family is likely to replace their open space 3-5 times, depending on the quality of the model.

Why does my Kirby Vacuum scent like Steaming Rubber?

My Kirby machine smells like rubber heat; what’s the problem? The belt is almost extended, or your brush is closed. Install a new belt and remove the end caps at the same time and clean up any debris.

Why does my Kirby Stink?

Kirby vacuum STINKS: If it scents even after picking up a disposable bag, the outer cloth bag has absorbed the odor. Please pick up a plastic bag, remove the bag from the base like a plastic shoe (you may need to buy a bag strap or use a large cable tie to tie it back).

Bottom line:

Kirby vacuums are sold only with a home demo included on the cover. They are costly, and some people have complained about aggressive marketing tactics and pressure to buy. The most expensive thing has to do a fantastic job, though, right? We are determined to find out if the Kirby vacuum is worth its high price. Kirby refused to sell us the model directly, so our anonymous machine cleaner set up a sales demo to clean Kirby to learn more about Kirby’s claims to their Kirby vacuum.