Vacuum RF Therapy serves as a method for diminishing cellulite. Within the aesthetics field, it’s applied to address the stubborn, puckered fat found on parts of the body such as thighs, knees, buttocks, stomachs, and upper arms. The technique utilizes a vacuum to separate the cellulite from the muscles, thereby enhancing blood circulation, promoting lymphatic drainage, and massaging the targeted area. Vacuum RF therapy shares similarities with “cupping,” a well-known traditional therapy originating from ancient Chinese practices.
Vacuum RF therapy is a non-invasive treatment backed by scientific research and certified by the FDA. A powerful solution to fight cellulite at every stage, it helps to reduce localized fat and reshape the body.
Vacuum RF Therapy – How Does It Work
By suctioning and pressing on the fat cells, the Vacuum RF therapy system removes fluid that causes cellulite. By using radiofrequency energy, tissue fibers, dermal collagen fibers, and fat cells are heated superficially and deeply.
During this process, the connective tissue is softened and the production of new collagen is induced, improving the skin’s elasticity and resilience.
Cellular turnover makes the skin appear more elastic and youthful. Localized skin laxity was reduced, dermal volume increased, and structure and texture were improved.
It’s great for a lot of things:
- Getting rid of hip, thigh, and buttock excess fat
- Blood circulation improved
- Muscle tension relief
- Increased lymphatic circulation and toxin elimination
- Improved skin firmness, elasticity, and tightness
- Inhibition of fat storage to get rid of cellulite
Which Body Parts Can Be Targeted
Vacuum RF therapy is a treatment that can be applied to the entire body. However, the most common areas of the body where it occurs include the legs, buttocks, abdomen, and upper arms.
How Does A Typical Treatment Go
There’s no pain, it’s relaxing, and you may feel some warmth with a comfortable massage. Generally, treatments last about 30 minutes, focusing on the problem area. To maintain your comfort and modesty, you’ll be properly draped during the procedure.
Vacuum Bipolar RF: How To Install And Operate
- Attach the accessory holder to the machine and turn it. Set the direction correctly by releasing 3 screws on top of the accessory holder if it doesn’t parallel the machine.
- Attach the handpiece connector securely to the machine. Insert it into the hole evenly. If it’s not done properly, the connector may damage the pins inside.
- Attach the connector of the Cavitation, the Face, and the Body
- Turn on the power switch. Press the power switch key. You will see the blue LED go on.
Vacuum Bipolar RF: How To Do Filter Cleaning
With a wrench, remove the hexagonal screw on the back side of the machine. When the oil is filled to the red line, empty the filter container. Open the lid of the filter container in the direction of the arrow. Pour out the contents of the filter container. After cleaning, place the filter container in the arrow direction.
Vacuum Bipolar RF: Caution During Use
- Do not use lotion or oil too much, as this can block the tube.
- Electrodes made of special materials can accept higher electric currents in the body. Make sure to change the electrode if it gets scratched.
- Do not use this machine with electric products such as electric blankets or anything with an electric conductor.
- Only people who have taken equipment training should use it.
- You can turn off the machine if you’re resting during treatment.
- It won’t work normally, turn it off and contact the distributor right away.
Vacuum Bipolar RF: How To Do Maintenance
- Make sure the power stays on for a few minutes after treatment to make the inner board cool.
- Please keep it in the shade, away from direct sunlight.
- Be careful not to drop the applicators when you move the machine.
- After using the handpiece, clean it with alcohol.
- Brush the body and face handpieces. Once you’re done, clean them. If you use too much lotion, your machine will break down.
- It is very important to check the inside of the machine regularly. If it has become filled with oil, please clean it and reattach it. Every six months, you should check the oil condition. Also, if you feel low vacuum pressure, check the oil filter.
Vacuum Bipolar RF – Solutions
While turning the power switch, if the light is not on, then, make sure that the power cord is plugged into the machine. Make sure that the fuse isn’t blown. If it is, replace it with the same standard fuse.
Conclusion
With vacuum bipolar RF, you can fight cellulite at every stage, reduce your localized fat, and reshape your body. After reading this guide, we hope that you have learned the way to handle your Vacuum Bipolar RF.
