Find How to Clean Bissell Pet Hair Eraser Vacuum

As much as a pet owner may like to pat their animal’s head or stroke their sides, the hair that fluffs off and collects on the floor isn’t something anyone loves. For sucking up pet hair, regular vacuums rarely prove to be up to snuff.

The Bissell Pet Hair Eraser Vacuum does exactly what its name promises to do; it eliminates all traces of Fido and Fluffy from your floors and furniture. It is a protected, inner hair the executive’s framework that snares and isolates human and pet hair from the dirt, spooling the hair together for a hands-free empty.

It allows the user more control through the surfaces that are being cleaned and can easily allow the user to reach crevices that may not be easily accessible with the conventional nozzle of the Pet Hair Eraser, similar to the sides of seats, in the middle of the seats of the vehicle and surprisingly the sides of covered steps.

The Bissell Pet Hair Eraser Vacuum is lighter and has a variety of attachment that make clearing the stairs genuinely simple. Not just have the attachments been incredible on the stairs, however, make clearing hair off the sofa simple too.

Benefits of the Bissell Pet Hair Eraser Vacuum.

• It helps capture and hold dust and allergens inside the vacuum so they don’t escape back into the air you breathe.
• BISSELL Pet Hair Eraser vacuum creates a direct suction path for powerful edge-to-edge suction that maximizes pet hair and debris pickup.
• Amplify pet hair, dirt, and garbage pickup on different surfaces, including rugs, hard surfaces, upholstery, and more.
• Effectively move around furniture and different spaces in the home.

Cleaning Bissell Pet Hair Eraser Vacuum

A full dirt container may reduce the suction or performance of a vacuum. When your Pet Hair Eraser Vacuum is full, you’ll need to empty and clean it:

1. Turn the power off: You need to turn the vacuum off by pressing the power button at the handle and removing the battery
2. Unplug the hand vacuum from the electrical outlet. Hold the and vacuum vertically and press the release button to release the dirt container and filter assembly from the unit.
3. Remove the filter by grabbing the tabs on both sides of the filter frame and pulling up from the dirt container. For best results, periodically tap filter assembly against trash can to remove dirt collected on the screen and filter.
4. Empty the dirt into a waste container.
5. After heavy usage of the vacuum, remove any pet hair, dirt, and debris from the filter and hand wash under warm water. Wash and flush the filter delicately and leave it out to dry.
6. Once dry, you are to replace the filter and attach it back into the dirt Handle filter tabs and press solidly to guarantee filter gathering is secure in the dirt container.
7. You may now re-attach the dirt cup to the hand vacuum by aligning the bottom of the dirt container to the bottom of the unit. Pivot upwards and snap into place. Use one hand to hold the team and utilize the other hand to clip the dirt container safely set up
8. Your dirt container and filter are now empty and clean.
9. Take note that the dirt container and screen may be rinsed with cold water. Ensure both are dry before reinserting. Do not rinse pleated filter.

Cleaning The Upper Tank

1. Handle the inner cyclone and also the twist to the left, until the locking tabs stop rotation. Pull down from the upper tank to get rid of it.
2. Wipe out the within of the upper tank and therefore the inner cyclone with a humid cloth moistened with water or a gentle cleaning solution.
3. If you want to completely clean the louvers located within the upper portion of the inner cyclone, hold the lower part of the cyclone and tenderly pull straight up on the louvers.
4. The inner cyclone and louvers could also be washed utilizing a mild detergent. Be certain it is totally dry before reassembling or damage to your unit may result.
5. Whenever cleaning is finished, reassemble the louvers over the inner cyclone by sliding it straight down on the highest of the inner cyclone. make certain to arrange the tabs when reassembling for correct installation.
6. To exchange the inner cyclone, slide it into the upper housing. Make sure to line up the inner cyclone by having the marking (Front)positioned toward the front of the unit. Push the internal cyclone in and rotate in and turn it to one side or locked checking until the locking tabs stop rotating.

Vacuum Rotating Floor Brush and Drive Belt

It is very important to specifically check and clean the Bissell Pet Hair Eraser Vacuum rotating floor brush and drive belt routinely for wear or damage. It is a must to also clean the brush and brush ends of strings, hair, and carpet fibers. This kind of debris can wrap round the brush and hamper its capacity to adequately clean your carpet. Likewise, eliminate any debris that has gathered under the brush cover.

1. Turn off the vacuum from the power plug.
2. Place the handle in a low position and turn the vacuum cleaner over so the bottom side is facing up.
3. Grasp the rotating floor brush at two ends and lift.
4. Clean the hair, strings, and other debris from the rotating floor brush, giving specific attention to the brush end.
5. Clean the hair, strings, and other debris from the motor pulley and drive belt regions.
6. Check the drive belt carefully for cuts, wear, or stressed regions.

Conclusion

The Bissell Pet Hair Eraser Vacuum has two filters that catch fine particles. You should look at the two filters month to month and wash or replace them each 3-6 months depending on use, or at whatever point they become dirty.

To find the washable pre-motor filter, eliminate the Easy Empty soil tank, press the top delivery button on the convey handle, and hand wash with warm water and a gentle cleanser. All parts should air dry totally before being replaced.